Adaptarea senzorului de rotire a volanului

[yo8rze]

Mulțumesc, Florin! Scuze, dar nu știu ce înseamnă FL. O să caut să apelez la cineva care a mai făcut treaba cu ceasurile... Cât despre calibrarea senzorului G85 am respectat instrucțiunile de mai jos, fără succes însă... 

 

,, Sensor for Steering Angle (G85)

Prerequisites:

Start the vehicle.

Drive in a short distance straight line on a level surface at a speed not higher than 20 km/h.

While driving turn the steering wheel one turn to the right and one turn to the left.

When having the steering wheel straight again stop the vehicle with the wheels pointed straight.

Ensure that the steering wheel is not moved again.

Keep the engine running and do not switch off the ignition.

System voltage at least 12.0 V.
 

[Select]
[03 - Brake Electronics]
[Security Access - 16]
Enter 40168, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 060
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, one of the fields should say "OK".
[Done, Go Back]
To make sure the basic setting was successful, check the sensor again.
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 1, the value has to be between -1.5 and +1.5 °.
[Done, Go Back]
[Close Controller, Go Back - 06]

Note: After successful basic setting, the Steering Limit Stop needs to be adapted too."

 

O să mai execut odată procedura, poate îmi iese.. 😊